About Us
We help companies to heat their buildings efficiently and sustainably,
with UK-manufactured natural refrigerant heat pumps made in Leeds.
Who We Are
Clade is the UK’s leading manufacturer of natural refrigerant, air source heat pumps for commercial and industrial use.
Based in the UK, we design and manufacture our heat pumps and refrigeration systems at our Technology Centre in Leeds, using exclusively natural refrigerants to deliver efficient, future-proof solutions for our customers.
With over 40 years of experience, our products are currently providing heating and cooling for buildings ranging from hospitals and supermarkets to offices, universities, and airports.
As well as manufacturing heat pumps and refrigeration systems, our team includes system designers, installation experts, and commissioning engineers, allowing us to offer tailored support at every stage of your project.
HOW WE HELP
At Clade, we believe that most businesses would like to become more eco-friendly. But we also know that this can’t come at the cost of efficiency, convenience, or reliability.
Our natural refrigerant heat pumps allow organisations to have the best of both worlds. Our customers get to decarbonise their heating to meet sustainability goals and comply with legislative changes around the decarbonisation of heating.
And, most importantly, they also get a cutting-edge heating system that they can depend on. Designed for commercial and industrial use, our products are:
- Efficient
- Reliable
- Eco-friendly
- UK manufactured
This means our clients get the high-performance heating systems they need while reaching environmental targets, future-proofing against legislative changes, and guarding against the increasing costs of energy.
WHY WE DO WHAT WE DO
As a Certified B Corp, we’re committed to pairing performance with purpose.
Heating accounts for nearly a third of the UK’s annual carbon footprint, and approximately half of this comes from commercial and industrial buildings.
We’re focused on bringing this figure down by helping our customers to reach their sustainability goals.
So far, we’ve provided carbon-free heating to a wide range of UK buildings, ranging from new builds to more complex retrofit projects such as hospitals, airports, and listed commercial buildings.
By making eco-friendly heating available to as many organisations as possible, we help our customers to aim high and deliver on their environmental commitments.
WHAT SETS US APART?
We pride ourselves on going the extra mile to deliver the best service possible in everything we do.
Clade Engineering is able to provide heat pumps as either air, ground, or water source. The most suitable type of heat pump depends on several factors related to your property. Generally, air source heat pumps are the most popular because they have the fewest requirements to install. Any type of heat pump can provide hot water and heating to your building.
Heat pumps using CO2 refrigerant as the heat source are friendly to the environment because the CO2 they use stays contained within the appliance and does not get released into the atmosphere. Furthermore, the CO2 we use in our heat pumps has the lowest global warming potential (GWP) of 1 compared to 1000’s for other refrigerants which will all significantly reduce the carbon footprint of your building.
Clade are the industry leaders in heat pump technology. As the heat in buildings challenge became clearer, Clade began the R&D for a new range of heat pumps which would provide a solution for a growing market. The first heat pump was installed in a Co-Op store and achieved a staggering SCOP of 3.7. We have over 41 years of experience and all of our systems are designed and manufactured in the UK.
Our heat pumps meet environmental standards by using a natural refrigerant like CO2. It has a Global Warming Potential (GWP) of 1, which reduces both cost and emissions.
Clade offers a full start to finish heat pumps solution. Our team of engineers design your system, manufacture and supply your heat pumps from our product range, our installation team ensures your heat pump is fully functional and our after sales support team provides ongoing maintenance. You can pick and choose as many or as few of our services to suit your requirements.
We ensure that your heat pump system continues to function. Our heat pumps can generate heat from 50kW to multi mega-watt, with a maximum water temperature of over 80 degrees Celsius and a minimum external air temperature of -20 degrees Celsius. Each of our heat pumps also comes with total cooling recovery to ensure a high quality of continued functionality.
Sustainability
Ultra-low GWP refrigerants. B Corp Certified. We put sustainability at our core, helping you make a positive impact on people and the planet.
Innovation
Our in-house R&D team in Leeds pushes heating technology forward, developing innovative solutions around the needs of modern buildings and process operators.
Customer First
Your needs shape our solutions. From consultant engineers to business owners, we work closely with you to deliver tailored solutions and exceptional service.
Made in the UK
Manufactured in Leeds, our heat pumps travel fewer miles, reducing our carbon footprint. Our UK team provides 24/7 engineering support and on-site commissioning.
Guaranteed Performance
Guaranteed performance or your money back. If your heat pump falls short after installation, commissioning and a six-month run-in, we’ll refund its cost and remove it.
End-to-End Support
Expert support at every stage, from system design and manufacturing to installation and aftercare. One team supporting your entire heat pump project.
OUR STORY
Clade started in 1985, when David Atkinson decided to set up a family business servicing refrigeration plants. That means we have over 40 years of experience delivering solutions for our customers!
Back then, we were known as A1 Refrigeration Installation. But after our current managing director, Dean Frost, came onboard in 2013, it became clear that heat in buildings was the real challenge that needed to be solved.
We embraced the challenge and began R&D for a new range of heat pumps that could provide a solution for a growing market. The first heat pump was installed in a Co-op store and achieved a staggering SCOP of 3.7. Clearly, we were onto something!
In 2021, we completed the rebrand to Clade, expanded our leadership team, and cemented our move into the heat pump market. Since then, we haven’t looked back. We’ve deployed more than 500 natural refrigerant appliances and delivered products that are proposed to save thousands of tonnes of CO2 emissions.
More recently, we also became part of the Groupe Atlantic family – a move that sees us join forces with other market-leading brands like Ideal Commercial Heating, Hamworthy, ACV and Keston. We’re excited to benefit from Groupe Atlantic’s knowledge and experience as we continue to support our customers with the latest heat pump technology and wider green energy solutions.
Our Timeline
-
1985
A1 Refrigeration Installation founded by David Atkinson
-
2013
Head Office opens at Bristol & Bath Science Park. Dean Frost joins.
Rebrand A1 to Engineering Solutions
-
2014
Service & Maintenance control centre opened Warrington
A1 manufacturing its first hydrocarbon refrigeration cooling and heating for Waitrose
-
2015
Aldi contract commences
-
2017
Refrigeration manufacturing opens in Leeds
Lorem ipsum dolor sit amet, consectetur adipiscing elit
-
2020
Lorem ipsum dolor sit amet, consectetur adipiscing elit
Lorem ipsum dolor sit amet, consectetur adipiscing elit
Lorem ipsum dolor sit amet, consectetur adipiscing elit
-
2024
Lorem ipsum dolor sit amet, consectetur adipiscing elit
GET TO KNOW US
Our hardworking team is split across two UK locations – our head office in Bristol and our Technology Centre in Leeds.
OUR MANAGEMENT TEAM
DEAN FROST
Dean has over 30 years of leadership experience at the intersection of energy, retail and industry.
Since joining Clade more than a decade ago, he has successfully led the company’s growth, resulting in a 12x increase in revenue. Dean currently leads all aspects of the management team, with a particular focus on sales.
TIM ROOK
Chartered Engineer with deep experience leading innovation and business growth in renewable energy and digital transformation. Leading Clade’s strategy and market development in the global energy transition towards a sustainable future. Tim leads our Sales & marketing drive, particularly for heat pumps and digital.
CHRIS BASSFORD
Chris has considerable experience of energy projects and engineering knowledge. He leads the design and engineering team across the business and across the technologies, but specifically for the application of their low carbon heat pumps in decarbonising the UK.
MIKE HODGSON
Mike is a Chartered Accountant and experienced Finance Director with success at the start-up level through to the larger corporate environment.
With over 10 years as Finance Director for Clade, Mike is responsible for our finance function, as well as IT infrastructure and systems, and company secretarial.
OLIVER BROWN
Oliver is a high-achieving manager and leader with strong people, process and technology skills.
He has a proven track record delivering consistent growth in competitive retail, industrial and commercial markets. At Clade, Oliver is responsible for on-site operations, with his teams delivering installation, commissioning and aftercare for both refrigeration and heat pump systems.
SARAH SAYLES
Sarah has over 25 years of HR experience and is a Chartered Fellow of the CIPD (the professional body for HR and people development).
With a degree in Psychology, she is well-versed in talent development, engagement and wellbeing. She also has a wealth of experience driving change in fast-paced environments – from leading strategy and business partnering to change management, TUPE, and M&A.
RICHARD BURKE
Richard is a highly accomplished technical leader with over 27 years’ experience in refrigeration and heat pumps.
With a strong track record in process excellence and customer service, he leads the manufacture of refrigeration plants and heat pumps at Clade, ensuring high-quality execution from production through to deployment.
TOM WILSON
Tom brings over 40 years of industry and sales experience, with a strong track record in driving growth, building teams and delivering for customers.
Work With Us
Join us on our missions for a more sustainable future, one heat pump at a time.
